GRAYBYTE WORDPRESS FILE MANAGER7182

Server IP : 149.255.58.128 / Your IP : 216.73.216.95
System : Linux cloud516.thundercloud.uk 5.14.0-427.26.1.el9_4.x86_64 #1 SMP PREEMPT_DYNAMIC Wed Jul 17 15:51:13 EDT 2024 x86_64
PHP Version : 8.2.28
Disable Function : allow_url_include, apache_child_terminate, apache_setenv, exec, passthru, pcntl_exec, posix_kill, posix_mkfifo, posix_getpwuid, posix_setpgid, posix_setsid, posix_setuid, posix_setgid, posix_seteuid, posix_setegid, posix_uname, proc_close, proc_get_status, proc_open, proc_terminate, shell_exec, show_source, system
cURL : ON | WGET : ON | Sudo : OFF | Pkexec : OFF
Directory : /lib64/python3.9/
Upload Files :
Current_dir [ Not Writeable ] Document_root [ Writeable ]

Command :


Current File : /lib64/python3.9//profile.py
#! /usr/bin/python3.9
#
# Class for profiling python code. rev 1.0  6/2/94
#
# Written by James Roskind
# Based on prior profile module by Sjoerd Mullender...
#   which was hacked somewhat by: Guido van Rossum

"""Class for profiling Python code."""

# Copyright Disney Enterprises, Inc.  All Rights Reserved.
# Licensed to PSF under a Contributor Agreement
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND,
# either express or implied.  See the License for the specific language
# governing permissions and limitations under the License.


import io
import sys
import time
import marshal

__all__ = ["run", "runctx", "Profile"]

# Sample timer for use with
#i_count = 0
#def integer_timer():
#       global i_count
#       i_count = i_count + 1
#       return i_count
#itimes = integer_timer # replace with C coded timer returning integers

class _Utils:
    """Support class for utility functions which are shared by
    profile.py and cProfile.py modules.
    Not supposed to be used directly.
    """

    def __init__(self, profiler):
        self.profiler = profiler

    def run(self, statement, filename, sort):
        prof = self.profiler()
        try:
            prof.run(statement)
        except SystemExit:
            pass
        finally:
            self._show(prof, filename, sort)

    def runctx(self, statement, globals, locals, filename, sort):
        prof = self.profiler()
        try:
            prof.runctx(statement, globals, locals)
        except SystemExit:
            pass
        finally:
            self._show(prof, filename, sort)

    def _show(self, prof, filename, sort):
        if filename is not None:
            prof.dump_stats(filename)
        else:
            prof.print_stats(sort)


#**************************************************************************
# The following are the static member functions for the profiler class
# Note that an instance of Profile() is *not* needed to call them.
#**************************************************************************

def run(statement, filename=None, sort=-1):
    """Run statement under profiler optionally saving results in filename

    This function takes a single argument that can be passed to the
    "exec" statement, and an optional file name.  In all cases this
    routine attempts to "exec" its first argument and gather profiling
    statistics from the execution. If no file name is present, then this
    function automatically prints a simple profiling report, sorted by the
    standard name string (file/line/function-name) that is presented in
    each line.
    """
    return _Utils(Profile).run(statement, filename, sort)

def runctx(statement, globals, locals, filename=None, sort=-1):
    """Run statement under profiler, supplying your own globals and locals,
    optionally saving results in filename.

    statement and filename have the same semantics as profile.run
    """
    return _Utils(Profile).runctx(statement, globals, locals, filename, sort)


class Profile:
    """Profiler class.

    self.cur is always a tuple.  Each such tuple corresponds to a stack
    frame that is currently active (self.cur[-2]).  The following are the
    definitions of its members.  We use this external "parallel stack" to
    avoid contaminating the program that we are profiling. (old profiler
    used to write into the frames local dictionary!!) Derived classes
    can change the definition of some entries, as long as they leave
    [-2:] intact (frame and previous tuple).  In case an internal error is
    detected, the -3 element is used as the function name.

    [ 0] = Time that needs to be charged to the parent frame's function.
           It is used so that a function call will not have to access the
           timing data for the parent frame.
    [ 1] = Total time spent in this frame's function, excluding time in
           subfunctions (this latter is tallied in cur[2]).
    [ 2] = Total time spent in subfunctions, excluding time executing the
           frame's function (this latter is tallied in cur[1]).
    [-3] = Name of the function that corresponds to this frame.
    [-2] = Actual frame that we correspond to (used to sync exception handling).
    [-1] = Our parent 6-tuple (corresponds to frame.f_back).

    Timing data for each function is stored as a 5-tuple in the dictionary
    self.timings[].  The index is always the name stored in self.cur[-3].
    The following are the definitions of the members:

    [0] = The number of times this function was called, not counting direct
          or indirect recursion,
    [1] = Number of times this function appears on the stack, minus one
    [2] = Total time spent internal to this function
    [3] = Cumulative time that this function was present on the stack.  In
          non-recursive functions, this is the total execution time from start
          to finish of each invocation of a function, including time spent in
          all subfunctions.
    [4] = A dictionary indicating for each function name, the number of times
          it was called by us.
    """

    bias = 0  # calibration constant

    def __init__(self, timer=None, bias=None):
        self.timings = {}
        self.cur = None
        self.cmd = ""
        self.c_func_name = ""

        if bias is None:
            bias = self.bias
        self.bias = bias     # Materialize in local dict for lookup speed.

        if not timer:
            self.timer = self.get_time = time.process_time
            self.dispatcher = self.trace_dispatch_i
        else:
            self.timer = timer
            t = self.timer() # test out timer function
            try:
                length = len(t)
            except TypeError:
                self.get_time = timer
                self.dispatcher = self.trace_dispatch_i
            else:
                if length == 2:
                    self.dispatcher = self.trace_dispatch
                else:
                    self.dispatcher = self.trace_dispatch_l
                # This get_time() implementation needs to be defined
                # here to capture the passed-in timer in the parameter
                # list (for performance).  Note that we can't assume
                # the timer() result contains two values in all
                # cases.
                def get_time_timer(timer=timer, sum=sum):
                    return sum(timer())
                self.get_time = get_time_timer
        self.t = self.get_time()
        self.simulate_call('profiler')

    # Heavily optimized dispatch routine for time.process_time() timer

    def trace_dispatch(self, frame, event, arg):
        timer = self.timer
        t = timer()
        t = t[0] + t[1] - self.t - self.bias

        if event == "c_call":
            self.c_func_name = arg.__name__

        if self.dispatch[event](self, frame,t):
            t = timer()
            self.t = t[0] + t[1]
        else:
            r = timer()
            self.t = r[0] + r[1] - t # put back unrecorded delta

    # Dispatch routine for best timer program (return = scalar, fastest if
    # an integer but float works too -- and time.process_time() relies on that).

    def trace_dispatch_i(self, frame, event, arg):
        timer = self.timer
        t = timer() - self.t - self.bias

        if event == "c_call":
            self.c_func_name = arg.__name__

        if self.dispatch[event](self, frame, t):
            self.t = timer()
        else:
            self.t = timer() - t  # put back unrecorded delta

    # Dispatch routine for macintosh (timer returns time in ticks of
    # 1/60th second)

    def trace_dispatch_mac(self, frame, event, arg):
        timer = self.timer
        t = timer()/60.0 - self.t - self.bias

        if event == "c_call":
            self.c_func_name = arg.__name__

        if self.dispatch[event](self, frame, t):
            self.t = timer()/60.0
        else:
            self.t = timer()/60.0 - t  # put back unrecorded delta

    # SLOW generic dispatch routine for timer returning lists of numbers

    def trace_dispatch_l(self, frame, event, arg):
        get_time = self.get_time
        t = get_time() - self.t - self.bias

        if event == "c_call":
            self.c_func_name = arg.__name__

        if self.dispatch[event](self, frame, t):
            self.t = get_time()
        else:
            self.t = get_time() - t # put back unrecorded delta

    # In the event handlers, the first 3 elements of self.cur are unpacked
    # into vrbls w/ 3-letter names.  The last two characters are meant to be
    # mnemonic:
    #     _pt  self.cur[0] "parent time"   time to be charged to parent frame
    #     _it  self.cur[1] "internal time" time spent directly in the function
    #     _et  self.cur[2] "external time" time spent in subfunctions

    def trace_dispatch_exception(self, frame, t):
        rpt, rit, ret, rfn, rframe, rcur = self.cur
        if (rframe is not frame) and rcur:
            return self.trace_dispatch_return(rframe, t)
        self.cur = rpt, rit+t, ret, rfn, rframe, rcur
        return 1


    def trace_dispatch_call(self, frame, t):
        if self.cur and frame.f_back is not self.cur[-2]:
            rpt, rit, ret, rfn, rframe, rcur = self.cur
            if not isinstance(rframe, Profile.fake_frame):
                assert rframe.f_back is frame.f_back, ("Bad call", rfn,
                                                       rframe, rframe.f_back,
                                                       frame, frame.f_back)
                self.trace_dispatch_return(rframe, 0)
                assert (self.cur is None or \
                        frame.f_back is self.cur[-2]), ("Bad call",
                                                        self.cur[-3])
        fcode = frame.f_code
        fn = (fcode.co_filename, fcode.co_firstlineno, fcode.co_name)
        self.cur = (t, 0, 0, fn, frame, self.cur)
        timings = self.timings
        if fn in timings:
            cc, ns, tt, ct, callers = timings[fn]
            timings[fn] = cc, ns + 1, tt, ct, callers
        else:
            timings[fn] = 0, 0, 0, 0, {}
        return 1

    def trace_dispatch_c_call (self, frame, t):
        fn = ("", 0, self.c_func_name)
        self.cur = (t, 0, 0, fn, frame, self.cur)
        timings = self.timings
        if fn in timings:
            cc, ns, tt, ct, callers = timings[fn]
            timings[fn] = cc, ns+1, tt, ct, callers
        else:
            timings[fn] = 0, 0, 0, 0, {}
        return 1

    def trace_dispatch_return(self, frame, t):
        if frame is not self.cur[-2]:
            assert frame is self.cur[-2].f_back, ("Bad return", self.cur[-3])
            self.trace_dispatch_return(self.cur[-2], 0)

        # Prefix "r" means part of the Returning or exiting frame.
        # Prefix "p" means part of the Previous or Parent or older frame.

        rpt, rit, ret, rfn, frame, rcur = self.cur
        rit = rit + t
        frame_total = rit + ret

        ppt, pit, pet, pfn, pframe, pcur = rcur
        self.cur = ppt, pit + rpt, pet + frame_total, pfn, pframe, pcur

        timings = self.timings
        cc, ns, tt, ct, callers = timings[rfn]
        if not ns:
            # This is the only occurrence of the function on the stack.
            # Else this is a (directly or indirectly) recursive call, and
            # its cumulative time will get updated when the topmost call to
            # it returns.
            ct = ct + frame_total
            cc = cc + 1

        if pfn in callers:
            callers[pfn] = callers[pfn] + 1  # hack: gather more
            # stats such as the amount of time added to ct courtesy
            # of this specific call, and the contribution to cc
            # courtesy of this call.
        else:
            callers[pfn] = 1

        timings[rfn] = cc, ns - 1, tt + rit, ct, callers

        return 1


    dispatch = {
        "call": trace_dispatch_call,
        "exception": trace_dispatch_exception,
        "return": trace_dispatch_return,
        "c_call": trace_dispatch_c_call,
        "c_exception": trace_dispatch_return,  # the C function returned
        "c_return": trace_dispatch_return,
        }


    # The next few functions play with self.cmd. By carefully preloading
    # our parallel stack, we can force the profiled result to include
    # an arbitrary string as the name of the calling function.
    # We use self.cmd as that string, and the resulting stats look
    # very nice :-).

    def set_cmd(self, cmd):
        if self.cur[-1]: return   # already set
        self.cmd = cmd
        self.simulate_call(cmd)

    class fake_code:
        def __init__(self, filename, line, name):
            self.co_filename = filename
            self.co_line = line
            self.co_name = name
            self.co_firstlineno = 0

        def __repr__(self):
            return repr((self.co_filename, self.co_line, self.co_name))

    class fake_frame:
        def __init__(self, code, prior):
            self.f_code = code
            self.f_back = prior

    def simulate_call(self, name):
        code = self.fake_code('profile', 0, name)
        if self.cur:
            pframe = self.cur[-2]
        else:
            pframe = None
        frame = self.fake_frame(code, pframe)
        self.dispatch['call'](self, frame, 0)

    # collect stats from pending stack, including getting final
    # timings for self.cmd frame.

    def simulate_cmd_complete(self):
        get_time = self.get_time
        t = get_time() - self.t
        while self.cur[-1]:
            # We *can* cause assertion errors here if
            # dispatch_trace_return checks for a frame match!
            self.dispatch['return'](self, self.cur[-2], t)
            t = 0
        self.t = get_time() - t


    def print_stats(self, sort=-1):
        import pstats
        pstats.Stats(self).strip_dirs().sort_stats(sort). \
                  print_stats()

    def dump_stats(self, file):
        with open(file, 'wb') as f:
            self.create_stats()
            marshal.dump(self.stats, f)

    def create_stats(self):
        self.simulate_cmd_complete()
        self.snapshot_stats()

    def snapshot_stats(self):
        self.stats = {}
        for func, (cc, ns, tt, ct, callers) in self.timings.items():
            callers = callers.copy()
            nc = 0
            for callcnt in callers.values():
                nc += callcnt
            self.stats[func] = cc, nc, tt, ct, callers


    # The following two methods can be called by clients to use
    # a profiler to profile a statement, given as a string.

    def run(self, cmd):
        import __main__
        dict = __main__.__dict__
        return self.runctx(cmd, dict, dict)

    def runctx(self, cmd, globals, locals):
        self.set_cmd(cmd)
        sys.setprofile(self.dispatcher)
        try:
            exec(cmd, globals, locals)
        finally:
            sys.setprofile(None)
        return self

    # This method is more useful to profile a single function call.
    def runcall(self, func, /, *args, **kw):
        self.set_cmd(repr(func))
        sys.setprofile(self.dispatcher)
        try:
            return func(*args, **kw)
        finally:
            sys.setprofile(None)


    #******************************************************************
    # The following calculates the overhead for using a profiler.  The
    # problem is that it takes a fair amount of time for the profiler
    # to stop the stopwatch (from the time it receives an event).
    # Similarly, there is a delay from the time that the profiler
    # re-starts the stopwatch before the user's code really gets to
    # continue.  The following code tries to measure the difference on
    # a per-event basis.
    #
    # Note that this difference is only significant if there are a lot of
    # events, and relatively little user code per event.  For example,
    # code with small functions will typically benefit from having the
    # profiler calibrated for the current platform.  This *could* be
    # done on the fly during init() time, but it is not worth the
    # effort.  Also note that if too large a value specified, then
    # execution time on some functions will actually appear as a
    # negative number.  It is *normal* for some functions (with very
    # low call counts) to have such negative stats, even if the
    # calibration figure is "correct."
    #
    # One alternative to profile-time calibration adjustments (i.e.,
    # adding in the magic little delta during each event) is to track
    # more carefully the number of events (and cumulatively, the number
    # of events during sub functions) that are seen.  If this were
    # done, then the arithmetic could be done after the fact (i.e., at
    # display time).  Currently, we track only call/return events.
    # These values can be deduced by examining the callees and callers
    # vectors for each functions.  Hence we *can* almost correct the
    # internal time figure at print time (note that we currently don't
    # track exception event processing counts).  Unfortunately, there
    # is currently no similar information for cumulative sub-function
    # time.  It would not be hard to "get all this info" at profiler
    # time.  Specifically, we would have to extend the tuples to keep
    # counts of this in each frame, and then extend the defs of timing
    # tuples to include the significant two figures. I'm a bit fearful
    # that this additional feature will slow the heavily optimized
    # event/time ratio (i.e., the profiler would run slower, fur a very
    # low "value added" feature.)
    #**************************************************************

    def calibrate(self, m, verbose=0):
        if self.__class__ is not Profile:
            raise TypeError("Subclasses must override .calibrate().")

        saved_bias = self.bias
        self.bias = 0
        try:
            return self._calibrate_inner(m, verbose)
        finally:
            self.bias = saved_bias

    def _calibrate_inner(self, m, verbose):
        get_time = self.get_time

        # Set up a test case to be run with and without profiling.  Include
        # lots of calls, because we're trying to quantify stopwatch overhead.
        # Do not raise any exceptions, though, because we want to know
        # exactly how many profile events are generated (one call event, +
        # one return event, per Python-level call).

        def f1(n):
            for i in range(n):
                x = 1

        def f(m, f1=f1):
            for i in range(m):
                f1(100)

        f(m)    # warm up the cache

        # elapsed_noprofile <- time f(m) takes without profiling.
        t0 = get_time()
        f(m)
        t1 = get_time()
        elapsed_noprofile = t1 - t0
        if verbose:
            print("elapsed time without profiling =", elapsed_noprofile)

        # elapsed_profile <- time f(m) takes with profiling.  The difference
        # is profiling overhead, only some of which the profiler subtracts
        # out on its own.
        p = Profile()
        t0 = get_time()
        p.runctx('f(m)', globals(), locals())
        t1 = get_time()
        elapsed_profile = t1 - t0
        if verbose:
            print("elapsed time with profiling =", elapsed_profile)

        # reported_time <- "CPU seconds" the profiler charged to f and f1.
        total_calls = 0.0
        reported_time = 0.0
        for (filename, line, funcname), (cc, ns, tt, ct, callers) in \
                p.timings.items():
            if funcname in ("f", "f1"):
                total_calls += cc
                reported_time += tt

        if verbose:
            print("'CPU seconds' profiler reported =", reported_time)
            print("total # calls =", total_calls)
        if total_calls != m + 1:
            raise ValueError("internal error: total calls = %d" % total_calls)

        # reported_time - elapsed_noprofile = overhead the profiler wasn't
        # able to measure.  Divide by twice the number of calls (since there
        # are two profiler events per call in this test) to get the hidden
        # overhead per event.
        mean = (reported_time - elapsed_noprofile) / 2.0 / total_calls
        if verbose:
            print("mean stopwatch overhead per profile event =", mean)
        return mean

#****************************************************************************

def main():
    import os
    from optparse import OptionParser

    usage = "profile.py [-o output_file_path] [-s sort] [-m module | scriptfile] [arg] ..."
    parser = OptionParser(usage=usage)
    parser.allow_interspersed_args = False
    parser.add_option('-o', '--outfile', dest="outfile",
        help="Save stats to <outfile>", default=None)
    parser.add_option('-m', dest="module", action="store_true",
        help="Profile a library module.", default=False)
    parser.add_option('-s', '--sort', dest="sort",
        help="Sort order when printing to stdout, based on pstats.Stats class",
        default=-1)

    if not sys.argv[1:]:
        parser.print_usage()
        sys.exit(2)

    (options, args) = parser.parse_args()
    sys.argv[:] = args

    # The script that we're profiling may chdir, so capture the absolute path
    # to the output file at startup.
    if options.outfile is not None:
        options.outfile = os.path.abspath(options.outfile)

    if len(args) > 0:
        if options.module:
            import runpy
            code = "run_module(modname, run_name='__main__')"
            globs = {
                'run_module': runpy.run_module,
                'modname': args[0]
            }
        else:
            progname = args[0]
            sys.path.insert(0, os.path.dirname(progname))
            with io.open_code(progname) as fp:
                code = compile(fp.read(), progname, 'exec')
            globs = {
                '__file__': progname,
                '__name__': '__main__',
                '__package__': None,
                '__cached__': None,
            }
        try:
            runctx(code, globs, None, options.outfile, options.sort)
        except BrokenPipeError as exc:
            # Prevent "Exception ignored" during interpreter shutdown.
            sys.stdout = None
            sys.exit(exc.errno)
    else:
        parser.print_usage()
    return parser

# When invoked as main program, invoke the profiler on a script
if __name__ == '__main__':
    main()

[ Back ]
Name
Size
Last Modified
Owner / Group
Permissions
Options
..
--
May 22 2025 21:42:28
0 / root
0555
__pycache__
--
December 12 2024 22:42:25
0 / root
0755
asyncio
--
December 12 2024 22:42:25
0 / root
0755
collections
--
December 12 2024 22:42:25
0 / root
0755
concurrent
--
December 12 2024 22:42:25
0 / root
0755
config-3.9-x86_64-linux-gnu
--
February 24 2025 22:47:34
0 / root
0755
ctypes
--
December 12 2024 22:42:25
0 / root
0755
curses
--
December 12 2024 22:42:25
0 / root
0755
dbm
--
December 12 2024 22:42:25
0 / root
0755
distutils
--
December 12 2024 22:42:25
0 / root
0755
email
--
December 12 2024 22:42:25
0 / root
0755
encodings
--
December 12 2024 22:42:25
0 / root
0755
ensurepip
--
December 12 2024 22:42:25
0 / root
0755
html
--
December 12 2024 22:42:25
0 / root
0755
http
--
December 12 2024 22:42:25
0 / root
0755
importlib
--
December 12 2024 22:42:25
0 / root
0755
json
--
December 12 2024 22:42:25
0 / root
0755
lib-dynload
--
December 12 2024 22:42:25
0 / root
0755
lib2to3
--
December 12 2024 22:42:30
0 / root
0755
logging
--
December 12 2024 22:42:25
0 / root
0755
multiprocessing
--
December 12 2024 22:42:25
0 / root
0755
pydoc_data
--
December 12 2024 22:42:25
0 / root
0755
site-packages
--
May 08 2025 21:42:23
0 / root
0755
sqlite3
--
December 12 2024 22:42:25
0 / root
0755
unittest
--
December 12 2024 22:42:25
0 / root
0755
urllib
--
December 12 2024 22:42:25
0 / root
0755
venv
--
December 12 2024 22:42:25
0 / root
0755
wsgiref
--
December 12 2024 22:42:25
0 / root
0755
xml
--
December 12 2024 22:42:25
0 / root
0755
xmlrpc
--
December 12 2024 22:42:25
0 / root
0755
zoneinfo
--
December 12 2024 22:42:25
0 / root
0755
LICENSE.txt
13.61 KB
December 03 2024 17:50:13
0 / root
0644
__future__.py
5.026 KB
December 03 2024 17:50:13
0 / root
0644
__phello__.foo.py
0.063 KB
December 03 2024 17:50:13
0 / root
0644
_aix_support.py
3.31 KB
December 03 2024 17:50:13
0 / root
0644
_bootlocale.py
1.759 KB
December 03 2024 17:50:13
0 / root
0644
_bootsubprocess.py
2.612 KB
December 03 2024 17:50:13
0 / root
0644
_collections_abc.py
28.686 KB
December 03 2024 17:50:13
0 / root
0644
_compat_pickle.py
8.544 KB
December 03 2024 17:50:13
0 / root
0644
_compression.py
5.215 KB
December 03 2024 17:50:13
0 / root
0644
_markupbase.py
14.28 KB
December 03 2024 17:50:13
0 / root
0644
_osx_support.py
21.263 KB
December 03 2024 17:50:13
0 / root
0644
_py_abc.py
6.044 KB
December 03 2024 17:50:13
0 / root
0644
_pydecimal.py
223.307 KB
December 03 2024 17:50:13
0 / root
0644
_pyio.py
91.129 KB
December 03 2024 17:50:13
0 / root
0644
_sitebuiltins.py
3.042 KB
December 03 2024 17:50:13
0 / root
0644
_strptime.py
24.685 KB
December 03 2024 17:50:13
0 / root
0644
_sysconfigdata__linux_x86_64-linux-gnu.py
40.27 KB
December 12 2024 10:10:49
0 / root
0644
_sysconfigdata_d_linux_x86_64-linux-gnu.py
40.079 KB
December 12 2024 10:01:52
0 / root
0644
_threading_local.py
7.051 KB
December 03 2024 17:50:13
0 / root
0644
_weakrefset.py
5.784 KB
December 03 2024 17:50:13
0 / root
0644
abc.py
4.805 KB
December 03 2024 17:50:13
0 / root
0644
aifc.py
31.841 KB
December 03 2024 17:50:13
0 / root
0644
antigravity.py
0.488 KB
December 03 2024 17:50:13
0 / root
0644
argparse.py
95.819 KB
December 03 2024 17:50:13
0 / root
0644
ast.py
54.938 KB
December 03 2024 17:50:13
0 / root
0644
asynchat.py
11.056 KB
December 03 2024 17:50:13
0 / root
0644
asyncore.py
19.631 KB
December 03 2024 17:50:13
0 / root
0644
base64.py
19.394 KB
December 03 2024 17:50:13
0 / root
0755
bdb.py
30.653 KB
December 03 2024 17:50:13
0 / root
0644
binhex.py
14.438 KB
December 03 2024 17:50:13
0 / root
0644
bisect.py
2.295 KB
December 03 2024 17:50:13
0 / root
0644
bz2.py
12.155 KB
December 03 2024 17:50:13
0 / root
0644
cProfile.py
6.196 KB
December 03 2024 17:50:13
0 / root
0755
calendar.py
24.25 KB
December 03 2024 17:50:13
0 / root
0644
cgi.py
33.137 KB
December 03 2024 17:50:13
0 / root
0755
cgitb.py
11.813 KB
December 03 2024 17:50:13
0 / root
0644
chunk.py
5.308 KB
December 03 2024 17:50:13
0 / root
0644
cmd.py
14.512 KB
December 03 2024 17:50:13
0 / root
0644
code.py
10.373 KB
December 03 2024 17:50:13
0 / root
0644
codecs.py
35.813 KB
December 03 2024 17:50:13
0 / root
0644
codeop.py
6.178 KB
December 03 2024 17:50:13
0 / root
0644
colorsys.py
3.969 KB
December 03 2024 17:50:13
0 / root
0644
compileall.py
19.634 KB
December 03 2024 17:50:13
0 / root
0644
configparser.py
53.305 KB
December 03 2024 17:50:13
0 / root
0644
contextlib.py
24.047 KB
December 03 2024 17:50:13
0 / root
0644
contextvars.py
0.126 KB
December 03 2024 17:50:13
0 / root
0644
copy.py
8.447 KB
December 03 2024 17:50:13
0 / root
0644
copyreg.py
7.104 KB
December 03 2024 17:50:13
0 / root
0644
crypt.py
3.729 KB
December 03 2024 17:50:13
0 / root
0644
csv.py
15.766 KB
December 03 2024 17:50:13
0 / root
0644
dataclasses.py
48.424 KB
December 03 2024 17:50:13
0 / root
0644
datetime.py
87.087 KB
December 03 2024 17:50:13
0 / root
0644
decimal.py
0.313 KB
December 03 2024 17:50:13
0 / root
0644
difflib.py
81.354 KB
December 03 2024 17:50:13
0 / root
0644
dis.py
20.088 KB
December 03 2024 17:50:13
0 / root
0644
doctest.py
102.117 KB
December 03 2024 17:50:13
0 / root
0644
enum.py
38.516 KB
December 03 2024 17:50:13
0 / root
0644
filecmp.py
9.789 KB
December 03 2024 17:50:13
0 / root
0644
fileinput.py
14.444 KB
December 03 2024 17:50:13
0 / root
0644
fnmatch.py
5.863 KB
December 03 2024 17:50:13
0 / root
0644
formatter.py
14.788 KB
December 03 2024 17:50:13
0 / root
0644
fractions.py
23.753 KB
December 03 2024 17:50:13
0 / root
0644
ftplib.py
34.664 KB
December 03 2024 17:50:13
0 / root
0644
functools.py
37.97 KB
December 03 2024 17:50:13
0 / root
0644
genericpath.py
4.858 KB
December 03 2024 17:50:13
0 / root
0644
getopt.py
7.313 KB
December 03 2024 17:50:13
0 / root
0644
getpass.py
5.85 KB
December 03 2024 17:50:13
0 / root
0644
gettext.py
26.627 KB
December 03 2024 17:50:13
0 / root
0644
glob.py
5.687 KB
December 03 2024 17:50:13
0 / root
0644
graphlib.py
9.349 KB
December 03 2024 17:50:13
0 / root
0644
gzip.py
21.262 KB
December 03 2024 17:50:13
0 / root
0644
hashlib.py
7.88 KB
December 12 2024 10:00:56
0 / root
0644
heapq.py
22.341 KB
December 03 2024 17:50:13
0 / root
0644
hmac.py
7.854 KB
December 12 2024 10:00:56
0 / root
0644
imaplib.py
53.617 KB
December 03 2024 17:50:13
0 / root
0644
imghdr.py
3.719 KB
December 03 2024 17:50:13
0 / root
0644
imp.py
10.289 KB
December 03 2024 17:50:13
0 / root
0644
inspect.py
115.464 KB
December 03 2024 17:50:13
0 / root
0644
io.py
3.458 KB
December 03 2024 17:50:13
0 / root
0644
ipaddress.py
76.791 KB
December 03 2024 17:50:13
0 / root
0644
keyword.py
1.022 KB
December 03 2024 17:50:13
0 / root
0644
linecache.py
5.333 KB
December 03 2024 17:50:13
0 / root
0644
locale.py
76.437 KB
December 03 2024 17:50:13
0 / root
0644
lzma.py
12.921 KB
December 03 2024 17:50:13
0 / root
0644
mailbox.py
76.947 KB
December 03 2024 17:50:13
0 / root
0644
mailcap.py
8.902 KB
December 03 2024 17:50:13
0 / root
0644
mimetypes.py
21.059 KB
December 03 2024 17:50:13
0 / root
0644
modulefinder.py
23.829 KB
December 03 2024 17:50:13
0 / root
0644
netrc.py
5.436 KB
December 03 2024 17:50:13
0 / root
0644
nntplib.py
40.062 KB
December 03 2024 17:50:13
0 / root
0644
ntpath.py
27.084 KB
December 03 2024 17:50:13
0 / root
0644
nturl2path.py
2.819 KB
December 03 2024 17:50:13
0 / root
0644
numbers.py
10.096 KB
December 03 2024 17:50:13
0 / root
0644
opcode.py
5.527 KB
December 03 2024 17:50:13
0 / root
0644
operator.py
10.499 KB
December 03 2024 17:50:13
0 / root
0644
optparse.py
58.954 KB
December 03 2024 17:50:13
0 / root
0644
os.py
38.149 KB
December 03 2024 17:50:13
0 / root
0644
pathlib.py
52.806 KB
December 03 2024 17:50:13
0 / root
0644
pdb.py
61.755 KB
December 03 2024 17:50:13
0 / root
0755
pickle.py
63.398 KB
December 03 2024 17:50:13
0 / root
0644
pickletools.py
91.295 KB
December 03 2024 17:50:13
0 / root
0644
pipes.py
8.707 KB
December 03 2024 17:50:13
0 / root
0644
pkgutil.py
23.707 KB
December 03 2024 17:50:13
0 / root
0644
platform.py
39.649 KB
December 03 2024 17:50:13
0 / root
0755
plistlib.py
27.586 KB
December 03 2024 17:50:13
0 / root
0644
poplib.py
14.842 KB
December 03 2024 17:50:13
0 / root
0644
posixpath.py
15.353 KB
December 03 2024 17:50:13
0 / root
0644
pprint.py
21.999 KB
December 03 2024 17:50:13
0 / root
0644
profile.py
22.345 KB
December 03 2024 17:50:13
0 / root
0755
pstats.py
28.639 KB
December 03 2024 17:50:13
0 / root
0644
pty.py
4.694 KB
December 03 2024 17:50:13
0 / root
0644
py_compile.py
8.011 KB
December 12 2024 10:00:56
0 / root
0644
pyclbr.py
14.897 KB
December 03 2024 17:50:13
0 / root
0644
pydoc.py
107.03 KB
December 03 2024 17:50:13
0 / root
0755
queue.py
11.227 KB
December 03 2024 17:50:13
0 / root
0644
quopri.py
7.096 KB
December 03 2024 17:50:13
0 / root
0755
random.py
30.746 KB
December 03 2024 17:50:13
0 / root
0644
re.py
15.489 KB
December 03 2024 17:50:13
0 / root
0644
reprlib.py
5.144 KB
December 03 2024 17:50:13
0 / root
0644
rlcompleter.py
7.469 KB
December 03 2024 17:50:13
0 / root
0644
runpy.py
12.777 KB
December 03 2024 17:50:13
0 / root
0644
sched.py
6.291 KB
December 03 2024 17:50:13
0 / root
0644
secrets.py
1.988 KB
December 03 2024 17:50:13
0 / root
0644
selectors.py
19.078 KB
December 03 2024 17:50:13
0 / root
0644
shelve.py
8.327 KB
December 03 2024 17:50:13
0 / root
0644
shlex.py
13.185 KB
December 03 2024 17:50:13
0 / root
0644
shutil.py
51.787 KB
December 03 2024 17:50:13
0 / root
0644
signal.py
2.381 KB
December 03 2024 17:50:13
0 / root
0644
site.py
21.567 KB
December 12 2024 10:00:56
0 / root
0644
smtpd.py
34.005 KB
December 03 2024 17:50:13
0 / root
0755
smtplib.py
44.341 KB
December 03 2024 17:50:13
0 / root
0755
sndhdr.py
6.933 KB
December 03 2024 17:50:13
0 / root
0644
socket.py
36.05 KB
December 03 2024 17:50:13
0 / root
0644
socketserver.py
26.656 KB
December 03 2024 17:50:13
0 / root
0644
sre_compile.py
27.317 KB
December 03 2024 17:50:13
0 / root
0644
sre_constants.py
7.009 KB
December 03 2024 17:50:13
0 / root
0644
sre_parse.py
39.823 KB
December 03 2024 17:50:13
0 / root
0644
ssl.py
51.299 KB
December 03 2024 17:50:13
0 / root
0644
stat.py
5.356 KB
December 03 2024 17:50:13
0 / root
0644
statistics.py
37.175 KB
December 03 2024 17:50:13
0 / root
0644
string.py
10.318 KB
December 03 2024 17:50:13
0 / root
0644
stringprep.py
12.614 KB
December 03 2024 17:50:13
0 / root
0644
struct.py
0.251 KB
December 03 2024 17:50:13
0 / root
0644
subprocess.py
81.605 KB
December 03 2024 17:50:13
0 / root
0644
sunau.py
17.732 KB
December 03 2024 17:50:13
0 / root
0644
symbol.py
2.228 KB
December 12 2024 10:02:20
0 / root
0644
symtable.py
7.72 KB
December 03 2024 17:50:13
0 / root
0644
sysconfig.py
24.958 KB
December 12 2024 10:11:36
0 / root
0644
tabnanny.py
11.139 KB
December 03 2024 17:50:13
0 / root
0755
tarfile.py
106.307 KB
December 12 2024 10:00:56
0 / root
0755
telnetlib.py
22.709 KB
December 03 2024 17:50:13
0 / root
0644
tempfile.py
27.308 KB
December 03 2024 17:50:13
0 / root
0644
textwrap.py
18.952 KB
December 03 2024 17:50:13
0 / root
0644
this.py
0.979 KB
December 03 2024 17:50:13
0 / root
0644
threading.py
52.906 KB
December 03 2024 17:50:13
0 / root
0644
timeit.py
13.164 KB
December 03 2024 17:50:13
0 / root
0755
token.py
2.313 KB
December 03 2024 17:50:13
0 / root
0644
tokenize.py
25.276 KB
December 03 2024 17:50:13
0 / root
0644
trace.py
28.522 KB
December 03 2024 17:50:13
0 / root
0755
traceback.py
24.082 KB
December 03 2024 17:50:13
0 / root
0644
tracemalloc.py
17.624 KB
December 03 2024 17:50:13
0 / root
0644
tty.py
0.858 KB
December 03 2024 17:50:13
0 / root
0644
types.py
9.556 KB
December 03 2024 17:50:13
0 / root
0644
typing.py
75.238 KB
December 03 2024 17:50:13
0 / root
0644
uu.py
7.106 KB
December 12 2024 10:11:37
0 / root
0644
uuid.py
26.684 KB
December 03 2024 17:50:13
0 / root
0644
warnings.py
19.227 KB
December 03 2024 17:50:13
0 / root
0644
wave.py
17.582 KB
December 03 2024 17:50:13
0 / root
0644
weakref.py
21.055 KB
December 03 2024 17:50:13
0 / root
0644
webbrowser.py
23.519 KB
December 03 2024 17:50:13
0 / root
0755
xdrlib.py
5.774 KB
December 03 2024 17:50:13
0 / root
0644
zipapp.py
7.358 KB
December 03 2024 17:50:13
0 / root
0644
zipfile.py
86.172 KB
December 03 2024 17:50:13
0 / root
0644
zipimport.py
30.044 KB
December 03 2024 17:50:13
0 / root
0644

GRAYBYTE WORDPRESS FILE MANAGER @ 2025
CONTACT ME
Static GIF